Sharkoon 5-Bay RAID-Station
The 5-Bay RAID Station is an external enclosure for five SATA hard drives, which support the memory modes Clean/Single, Large, Clone as well as RAID 0, 1, 3, 5, and 10.
The case of the RAID station consists of solid SECC steel, the front door from ABS plastic. Behind this hides the hard drive mounting frame, in which hard drives in 2.5” or 3.5” format can be screwed into. The mounting frame itself is simply inserted into the housing and locked.
The configuration of the RAID modes is done quickly and easily through the DIP switch located on the backside of the case. The USB3.0 and eSATA interface is also located here, through which the RAID station can be attached to compatible devices. An appropriate cable is also included in shipping, including the necessary screws needed for installing the hard drive.
Regardless of whether it’s a private media collection or the data storage for a small office environment, with the 5-Bay RAID Station it’s always on the safe side!
Features:
-
External RAID case with five mounting bays for 2.5" and 3.5" SATA HDDs
-
Supported modes: Clean/Single, Large, Clone and RAID 0/1/3/5/10
-
Easy RAID mode configuration
-
Automatic rebuild in Clone and RAID 1/3/5/10 mode
-
HotSpare support in Clone and RAID 1/3/5/10 mode
-
Supports HDD roaming
-
Internal interfaces: SATA I and II (compatible with SATA III)
-
External interfaces: eSATA and USB3.0
-
Fast Swap mechanism for easy HDD handling
-
Premium quality craftsmanship
-
On/off button
-
LED indications for power, HDD activity and rebuild mode
-
Pre-installed 120 mm fan
SATA features:
-
Port Multiplier Functionality
-
Auto-negotiation between SATA I (1.5 Gbps) and SATA II (3 Gbps)
-
Hot-Plug support in CLEAN mode
-
Supports Native Command Queue (NCQ)
-
Supports Port Multiplier Aware and non-Port Multiplier Aware host in RAID mode
-
Supports Asynchronous Signal Recovery
-
Supports Spread Spectrum Clocking
-
Supports BIST and Loopback mode
-
Supports 48-bit LBA addressing
-
Supports Asynchronous Notification
USB features:
-
Compatible with USB Super Speed, High Speed and Full Speed
-
Compatible with OHCI/UHCI/EHCI hosts
-
Supports Mass Storage Class
Specifications:
-
Five mounting bays for 2.5" and 3.5" SATA HDDs
-
Metal chassis (SECC) and plastic front panel (ABS)
-
Dimensions: 282 x 150 x 215 mm (L x W x H)
-
Weight: ~4 kg
-
250 W full range power supply
Se produsentens nettside for mer informasjon.
BETA: Spesifikasjonene nedenfor er hentet inn fra en 3. parts leverandør (Icecat). Vi tar forbehold om feil eller avvik i spesifikasjonene. Oppdager du feil, må du gjerne kontakte oss.
Lagringsmedium |
---|
Lagringsstasjonens størrelse | 3.5" |
Antall lagringsdrivere som støttes | 5 |
Støttede lagrings-grensesnitt | SATA, Serial ATA II, Serial ATA III |
RAID-nivåer | 0, 1, 3, 5, 10 |
Maksimal lagringskapasitet | 20 TB |
Innebygd kortleser | Nei |
Tilkoblingsevne |
---|
USB 3.0 ( 3.1 Gen 1 ) antall porter | 1 |
Antall eSATA-porter | 1 |
Design |
---|
Produktfarge | Svart |
LED-indikatorer for kommunikasjon | Harddisk, Kraft indikator |
Vifte diameter | 12 cm |
Antall vifter | 1 vifter |
Systemkrav |
---|
Minimum prosessor | Intel Pentium-III 500 MHz |
Minimum RAM | 64 MB |
Vekt og dimensjoner |
---|
Vekt | 4 kg |
Bredde | 150 mm |
Dybde | 282 mm |
Høyde | 215 mm |
Emballasjeinnhold |
---|
Kabler inkludert | AC,eSATA,USB |
Andre funksjoner |
---|
Fysiske mål (BxDxH) | 150 x 282 x 215 mm |
Kompatible operativsystemer | Windows XP, Vista, 7 |