Vennligst vent...
Produktet ble lagt i handlevognen. Se handlevognen her
Du er her Forsiden Datautstyr Rekvisita Filament Prima Filaments PrimaSelect PLA Glossy, NebulaPurple

Prima Filaments PrimaSelect PLA Glossy, NebulaPurple 1.75 mm, 750 g (PS-PLAG-175-0750-BP)
Prima Filaments PrimaSelect PLA Glossy, NebulaPurple 1.75 mm, 750 g (PS-PLAG-175-0750-BP)
Prima Filaments PrimaSelect PLA Glossy, NebulaPurple 1.75 mm, 750 g (PS-PLAG-175-0750-BP)
Prima Filaments PrimaSelect PLA Glossy, NebulaPurple 1.75 mm, 750 g (PS-PLAG-175-0750-BP)
Prima Filaments PrimaSelect PLA Glossy, NebulaPurple 1.75 mm, 750 g (PS-PLAG-175-0750-BP)
Prima Filaments PrimaSelect PLA Glossy, NebulaPurple 1.75 mm, 750 g (PS-PLAG-175-0750-BP)
Prima Filaments PrimaSelect PLA Glossy, NebulaPurple 1.75 mm, 750 g (PS-PLAG-175-0750-BP)
Prima Filaments PrimaSelect PLA Glossy, NebulaPurple 1.75 mm, 750 g (PS-PLAG-175-0750-BP)
Varenummer:
PS-PLAG-175-0750-BP
EAN:
7340002117966

Prima Filaments PrimaSelect PLA Glossy, NebulaPurple 1.75 mm, 750 g

inkl. mva
319,-
2 stk Lokalt lager (sendes normalt samme dag)
Frakt fra 79,-
100% norsk nettbutikk
Beskrivelse

PrimaSELECT™ PLA Glossy is a very nice 3D Print material, it's non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it's easy to get great prints. Filament from PrimaCreator comes on a transparent spool which makes it easy to see how much filament there are left on the spool.

PrimaSELECT™ PLA Glossy is a new type of PLA that is much stronger than regular PLA and has a heat resistance up to 75°C. This means that you can use it for mechanical parts, as well as parts that you can use in (for example) a hot car during summer without the risk of the print going soft.


PLA Glossy is a unique filament due to it’s shiny surface. It will produce prints with an extremely shiny/metal finish that really stands out.


PLA Glossy is used the same way as regular PLA but with a slightly higher temperature range. The print temperature should be between 210 – 230°C (typical is 220°C). The filament should be used with a heated build plate for best results and depending on size of the print you, can use it with a range of 20 – 90°C (typical is 60°C) Use normal print speed 40-60 mm/s.


We recommend that you use PrimaFIX on you build surface for best adhesion and to avoid warping.


WHY SHOULD I USE PRIMASELECT™ PLA GLOSSY?

  • 750 gr on the spool
  • Very easy to print with
  • Excellent layer adhesion
  • Unique metallic look, very glossy
  • FDA approved
  • Made from 100% virgin PLA pellets
  • Excellent mechanical properties
  • Better heat resistance than normal PLA


Se produsentens nettside for mer informasjon.

Bildet kan avvike fra produktet. Vi tar forbehold mot trykkfeil og endringer av priser og spesifikasjoner uten varsel.