Vennligst vent...
Produktet ble lagt i handlevognen. Se handlevognen her
Du er her Forsiden Datautstyr Rekvisita Filament Prima Filaments PrimaSelect PLA Chameleon Filament

Prima Filaments PrimaSelect PLA Chameleon Filament Pink/ Purple 1.75 mm, 750 g (PS-PLAC-175-0750-PP)
Prima Filaments PrimaSelect PLA Chameleon Filament Pink/ Purple 1.75 mm, 750 g (PS-PLAC-175-0750-PP)
Prima Filaments PrimaSelect PLA Chameleon Filament Pink/ Purple 1.75 mm, 750 g (PS-PLAC-175-0750-PP)
Prima Filaments PrimaSelect PLA Chameleon Filament Pink/ Purple 1.75 mm, 750 g (PS-PLAC-175-0750-PP)
Prima Filaments PrimaSelect PLA Chameleon Filament Pink/ Purple 1.75 mm, 750 g (PS-PLAC-175-0750-PP)
Prima Filaments PrimaSelect PLA Chameleon Filament Pink/ Purple 1.75 mm, 750 g (PS-PLAC-175-0750-PP)
Prima Filaments PrimaSelect PLA Chameleon Filament Pink/ Purple 1.75 mm, 750 g (PS-PLAC-175-0750-PP)
Prima Filaments PrimaSelect PLA Chameleon Filament Pink/ Purple 1.75 mm, 750 g (PS-PLAC-175-0750-PP)
Varenummer:
PS-PLAC-175-0750-PP
EAN:
7340002118857

Prima Filaments PrimaSelect PLA Chameleon Filament Pink/Purple 1.75 mm, 750 g

inkl. mva
379,-
2 stk Lokalt lager (sendes normalt samme dag)
Frakt fra 79,-
100% norsk nettbutikk
Beskrivelse

PrimaSELECT™ PLA Chamelon is a new filament from PrimaCreator with a unique look to it. The filament is made up from two strands of filament which results in a print that has dual colors. The effect is stunning as the print seems to “change color” as you turn it and the light reflects in different ways.

PLA is one of the most common used 3d-print materials in the world, it´s non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it's easy to get great prints. Filament from Prima Creator comes on a transparent spool which makes it easy to see how much filament there are left on the spool. Polylactic acid (PLA) is a bio-degradable polymer that is produced from lactic acid, which can be fermented from crops such as corn.

PrimaSELECT PLA CHAMELEON adheres to BuildTak, PEI or glass plates which are coated with adhesive spray or PrimaFIX. A heated build platform is not essential. However, if your 3D printer has one, we recommend a setting of 35 – 60 °C for best 3D printing results. Recommended print temperature is 205 – 225°C


WHY SHOULD I USE PRIMASELECT™ PLA CHAMELEON?

  • Made from virgin PLA
  • Changes color when you turn it or depending on light
  • Comes in a variety of different color schemes
  • Prints like regular PLA
  • No hazardous fumes or unpleasant smell
  • Made Low risk of warping

 

Se produsentens nettside for mer informasjon.

Bildet kan avvike fra produktet. Vi tar forbehold mot trykkfeil og endringer av priser og spesifikasjoner uten varsel.