Vennligst vent...
Produktet ble lagt i handlevognen. Se handlevognen her
Produktet er ikke lenger i vårt sortiment. Ta kontakt om du trenger hjelp til å finne et erstatningsprodukt.
Lian Li Alpha 550W Mid Tower RGB, ATX, white, demobrukt (Alpha-550W-Demo)

Lian Li Alpha 550W Mid Tower RGB, ATX, white, demobrukt

Gratis frakt!
100% norsk nettbutikk

Dette produktet er en demovare til redusert pris. Produktet selges ikke som nytt og dette kommer av at det kan ha vært brukt, har ødelagt emballasje, er returnert på angrefrist, reparert av leverandør og lignende. Hvis ikke annet er oppgitt er varen i god stand. Varen har standard garanti.

Lian Li Alpha 550 RGB Mid Tower


"The typical price for a Lian Li chassis is usually pretty high, but you get what you pay for in regards to build quality and engineering. Sure, they’ve dropped the aluminium in favour of steel here, but it’s worked extremely well. There’s a huge amount of tempered glass here too, more so than most other chassis. That does go a long way to explaining the price tag. However, when you factor in the four fans, three of which are RGB, as well as the hub/controller, the price starts looking a lot more competitive.

Make no mistake, this is one of the nicest looking and best laid out chassis we’ve reviewed in a while. It may even be my favourite Lian-Li chassis for a long time too. It’s priced very competitively too and holds up well against its main rival, the Corsair 570X. Personally, I love the black model we reviewed, but I’ll be damned if the white version doesn’t look even better!" -
Les hele testen her.

The Alpha 550 housing is a midi tower with a particularly good price/performance ratio from the renowned manufacturer Lian Li, which is equipped with many tempered glass elements and well thought-out features. Three pre-installed 120 mm RGB fans, extensive cable management for a clean appearance, readiness for vertical graphic card mounting and extensive watercooling support are just some of the highlights that distinguish the stylish housing..



  • Designer case made for motherboards up to E-ATX
  • Front, side panels and roof made of 4 mm thick tempered glass
  • 3x 120 mm RGB Fan & RGB LED strip incl. remote control
  • I/O-Panel with 2x USB 3.0 / 1x USB 3.1 Type C & HD-Audio In/Out
  • Support for two radiators in 360 and 420 mm format
  • Vibration absorbing 4x 3.5/2.5 inch & 4x 2.5 inch drive slots
  • Compatible with graphics cards up to 40 cm long & CPU coolers up to 17 cm


The robust chassis is made of one millimetre thick SECC steel and is panelled with four millimetre thick tempered glass elements on the front and side panels. The left side panel is coated in black over the PSU shroud to achieve a particularly clean look. It has a hard drive cage with a vibration-dampening bay for two 3.5-inch or 2.5-inch drives and the power supply unit. The hard drive cage is easily removed with a thumb screw and can then be replaced by pumps or reservoirs.

A multifunctional adapter is used for their installation, which is compatible with most pumps or reservoirs through numerous slotted holes and can be mounted both on and in the PSU Shroud. In addition, a 2.5-inch drive can be attached to it. Further mounting options for two 3.5-inch or 2.5-inch drives are located behind the motherboard tray, on the black mounting plates, which can be removed without tools for ease of installation. Another white cover is also removable for mounting three 2.5-inch drives and this doubles as a cable cover.

The highlight of the case is the three 120 mm PWM fans installed in the front panel. The Bora fans from Lian Li have 16 individually addressable RGB LEDs, an elegant aluminium frame and double ball bearings for smoothness and durability. In sync with the addressable RGB LED strip below the I/O panel, its illumination can be configured via the integrated RGB controller and fan hub with the infrared remote control with over 300 dynamic lighting effects. For easy maintenance and cleaning, the fans can also be completely dismantled.

The motherboard tray and PSU shroud cover offer numerous openings for cables, some of which are rubberized and equipped with Velcro straps. 360 or 420 mm radiators can be accommodated in the front and roof of the Alpha housing. They are mounted on brackets that can be removed from the outside, making installation easier. Three 120 or 140 mm fans can also be attached to the holes here. A 120 mm model is pre-installed on the back. Ventilation openings with fine dust filters are located behind the front, inside the lid and at the bottom of the housing.

Other special features of the midi tower include readiness for the vertical mounting of two graphic cards in the form of two vertical PCIe slot brackets. A riser card cable must be ordered separately. GPUs can be up to 40 centimeters long and CPU coolers up to 17 centimeters high. In addition to two USB 3.0 ports, the I/O panel is concealed behind a hinged front panel and offers a modern USB 3.1 Type-C port, which can be inserted in either orientation and can charge mobile devices very quickly while offering extremely high data transfer rates.

Se produsentens nettside for mer informasjon.

Bildet kan avvike fra produktet. Vi tar forbehold mot trykkfeil og endringer av priser og spesifikasjoner uten varsel.