Lian Li Alpha 330W Mid Tower | Multicom
Vennligst vent...
Produktet ble lagt i handlevognen. Se handlevognen her

Produktet er ikke lenger i vårt sortiment. Ta kontakt om du trenger hjelp til å finne et erstatningsprodukt.
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Lian Li Alpha 330W Mid Tower EATX, white (Alpha-330W)
Varenummer:
Alpha-330W
EAN:
4718466008459

Lian Li Alpha 330W Mid Tower EATX, white

99% score og Redaktørens valg på TweakTown.com: ... a near perfect solution!
  • USB 3.1 Type-C i front
  • Plass til 40 cm lange skjermkort
  • Front- og sidepanel av herdet glass
100% norsk nettbutikk
Beskrivelse

Lian Li Alpha 330 Mid Tower


 

"To be blunt, Lian Li marches right into the mainstream market and kicks down the doors. Yes, there are many mid-tower cases with tempered glass, but not many are this clean when complete, and fewer still offer the feature set that Lian Li provides at this cost. A tempered glass front with room to breathe and keep the components inside cool, glass on both sides with paint to block what you don't want to see, and ever so slightly tinted glass to look through at what you do want to see. There is a pump bracket, room for a pair of 360mm radiators, optional 140mm radiator option at the top, from all angles and aspects, Lian Li took what could have fallen into the average category and took it right to the top.

The Lian Li Alpha 330 is a tough act to follow. The rich feature set including USB 3.1, a pump bracket, and ingenious solutions to many needs put this chassis in the running for the best of its kind. It may not be what we expected from Lian Li, but none the less, it is a near perfect solution!" - TweakTown.com
Les hele testen her.



The Alpha 330 housing is a particularly affordable midi tower from the renowned manufacturer Lian Li, which is equipped with many tempered glass elements and sophisticated features. Comprehensive cable management for a clean look, preparation for vertical graphic card mounting and extensive watercooler support are just a few of the highlights that distinguish the stylish housing.

 

THE FEATURES OF THE LIAN LI ALPHA 330 AT A GLANCE

  • Designer case for motherboards up to E-ATX
  • Front- and side panels in 4 mm thick tempered glass
  • I/O-Panel with 2x USB 3.0 / 1x USB 3.1 Type C & HD-Audio In/Out
  • Support for two radiators in 360 and 420 mm formats
  • 4x 3.5/2.5 inch & 4x 2.5 inch vibration-dampened drive slots
  • 1x 120 mm fan pre-installed - total of 7 possible
  • Graphics cards up to 40 cm long & CPU coolers up to 17 cm high are compatible

 

TEMPERED GLASS & SOPHISTICATED CASE DESIGN

The robust chassis is made of one millimetre thick SECC steel and is panelled with four millimetre thick tempered glass elements on the front and side panels. The left side panel is coated in black over the PSU shroud to achieve a particularly clean look. It has a hard drive cage with a vibration-proof bays for two 3.5-inch or 2.5-inch drives and the power supply unit. The hard drive cage is easily removed with a thumb screw and can then be replaced by pumps or reservoirs.

A multifunctional adapter is used for their installation, which is compatible with most pumps or reservoirs thanks to numerous holes and can be mounted both on and in the PSU shroud. In addition, a 2.5-inch drive can be attached to it. Additional mounting options for two 3.5-inch or 2.5-inch drives are located behind the motherboard tray, on the black mounting plates, which can be removed without tools for ease of installation. Another white cover is also removable for mounting three 2.5-inch drives and this doubles as a cable cover.

The mainboard tray and PSU shroud cover offer numerous openings for cables, some of which are rubberised and equipped with Velcro straps. 360 or 420 mm radiators can be accommodated in the front and cover of the Alpha housing. In the front, they are mounted on a bracket that can be removed from the outside, which makes mounting easier. Three 120 or 140 mm fans can also be attached to the holes on this or in the cover. A 120 mm model is pre-installed on the back. Ventilation openings with fine dust filters are located behind the front, inside the lid and at the bottom of the housing.

The special features of the midi tower also include readiness for the vertical mounting of two graphics cards, in the form of two vertical PCIe slot brackets. A riser card cable must be ordered separately. GPUs can be up to 40 centimetres long and CPU coolers up to 17 centimetres high. In addition to two USB 3.0 ports, the I/O panel in the lid has a modern USB 3.1 type C port, which is capable of being inserted in both orientations, charging mobile devices very quickly and also enables extremely high data transfer rates.





Se produsentens nettside for mer informasjon.

Bildet kan avvike fra produktet. Vi tar forbehold mot trykkfeil og endringer av priser og spesifikasjoner uten varsel.