|
|
1. LGA1700 socket: Support for 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors* |
2. L3 cache varies with CPU |
* Please refer to "CPU Support List" for more information.
|
|
|
1. Intel® B660 Express Chipset |
|
|
1. Support for DDR4 5333(O.C.)/ DDR4 5133(O.C.)/DDR4 5000(O.C.)/4933(O.C.)/4800(O.C.)/ 4700(O.C.)/ 4600(O.C.)/ 4500(O.C.)/ 4400(O.C.)/ 4300(O.C.)/4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200/3000/2933/2666/2400/2133 MHz memory modules |
2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory |
3. Dual channel memory architecture |
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
6. Support for Extreme Memory Profile (XMP) memory modules |
(Please refer "Memory Support List" for more information.)
|
|
Integrated Graphics Processor-Intel® HD Graphics support:
|
1. 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz |
* Support for HDMI 2.1 version and HDCP 2.3. |
** Support native HDMI 2.1 TMDS compatible ports. |
2. 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz |
* Support for DisplayPort 1.2 version and HDCP 2.3 |
(Graphics specifications may vary depending on CPU support.)
|
|
|
1. Realtek® Audio CODEC |
2. High Definition Audio |
3. 2/4/5.1/7.1-channel |
4. Support for S/PDIF Out |
* To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTE's website for details on configuring the audio software. |
|
|
1. Realtek® GbE LAN chip (1 Gbps/100 Mbps) |
Wireless Communication module
|
AMD Wi-Fi 6E RZ608 (MT7921K)
|
1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands |
2. BLUETOOTH 5.2 |
3. Support for 11ax 80MHz wireless standard and up to 1.2 Gbps data rate |
(Actual data rate may vary depending on environment and equipment.)
|
|
|
1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
(The PCIEX16 slot conforms to PCI Express 4.0 standard.) |
2. 4 x PCI Express x16 slots, running at x1 (PCIEX1_1, PCIEX1_3~PCIEX1_5) |
(The PCIEX4 and PCIEX1 slots conform to PCI Express 3.0 standard.) |
|
|
1. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) |
Chipset: |
1. 1 x M.2 connector (Socket 3, M key, type 2260/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB) |
2. 4 x SATA 6Gb/s connectors |
Support for RAID 0, RAID 1, RAID 5, and RAID 10 |
|
Intel® Optane™ Memory Ready |
* System acceleration with Intel® Optane™ Memory can only be enabled on the M.2 connector supported by the Chipset.
|
|
|
1. 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2x2 support |
2. 1 x USB Type-C® port with USB 3.2 Gen 1 support, available through the internal USB header |
3. 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel |
4. 2 x USB 3.2 Gen 1 ports available through the internal USB header |
5. 4 x USB 2.0/1.1 ports on the back panel |
Chipset+2 USB 2.0 Hubs: |
1. 4 x USB 2.0/1.1 ports available through the internal USB headers |
|
|
1. 1 x 24-pin ATX main power connector |
2. 1 x 8-pin ATX 12V power connector |
3. 1 x CPU fan header |
4. 1 x water cooling CPU fan header |
5. 3 x system fan headers |
6. 1 x system fan/water cooling pump header |
7. 2 x addressable LED strip headers |
8. 2 x RGB LED strip headers |
9. 2 x M.2 Socket 3 connectors |
10. 4 x SATA 6Gb/s connectors |
11. 1 x front panel header |
12. 1 x front panel audio header |
13. 1 x USB Type-C® header, with USB 3.2 Gen 1 support |
14. 1 x USB 3.2 Gen 1 header |
15. 2 x USB 2.0/1.1 headers |
16. 2 x Thunderbolt™ add-in card connectors |
17. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) |
18. 1 x serial port header |
19. 1 x Q-Flash Plus button |
20. 1 x reset button |
21. 1 x reset jumper |
22. 1 x Clear CMOS jumper |
*All fan headers are subject to support AIO_Pump, Pump and high performance fan with the capability of delivering up to 2A/12V @ 24W.
|
|
|
1. 1 x PS/2 keyboard/mouse port |
2. 2 x SMA antenna connectors (2T2R) |
3. 1 x USB Type-C® port, with USB 3.2 Gen 2x2 support |
4. 1 x USB 3.2 Gen 2 Type-A port (red) |
5. 4 x USB 2.0/1.1 ports |
6. 1 x HDMI port |
7. 1 x DisplayPort |
8. 1 x RJ-45 port |
9. 3 x audio jacks |
|
|
1. iTE® I/O Controller Chip |
|
|
1. Voltage detection |
2. Temperature detection |
3. Fan speed detection |
4. Water cooling flow rate detection |
5. Fan fail warning |
6. Fan speed control |
* Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. |
|
|
1. 1 x 256 Mbit flash |
2. Use of licensed AMI UEFI BIOS |
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
|
|
1. Support for APP Center |
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. |
@BIOS |
EasyTune |
Fast Boot |
Game Boost |
ON/OFF Charge |
RGB Fusion |
Smart Backup |
System Information Viewer |
2. Support for Q-Flash Plus |
3. Support for Q-Flash |
4. Support for Xpress Install |
|
|
1. Norton® Internet Security (OEM version) |
2. LAN bandwidth management software |
|
|
1. Support for Windows 11 64-bit |
2. Support for Windows 10 64-bit |
|
|
1. ATX Form Factor; 30.5cm x 24.4cm
|