Kontakt oss   |   Support   |   Salgsvilkår   |   FAQ - ofte stilte spørsmål   |   Hvordan handle   |   Sikkerhet   |   Om oss   |   Ledig stilling


Marcus og Martinus




Test av norske nettbutikker



Du er her // Forsiden // //
Produktet er ikke lenger i vårt sortiment. Ta kontakt om du trenger hjelp til å finne et erstatningsprodukt.




Product Description

Fujitsu's latest generation of Rohs compliant 15K Enterprise Hard Disk Drives offer capacities of up to 147GB in a 1-inch high, 3.5-inch form factor.

The MAX Serial Attach SCSI (SAS) drive series is the latest generation Hard Disk products from Fujitsu offering low profile, high speed and high capacity to high performance enterprise computing applications.

The MAX (RC) series comes with a dual ported hot-swap SAS interface connector, spindle speed of 15K RPM and capacities of 36, 73 and 147GB. Areal density has doubled and internal drive transfer rates have been increased by 24% to 147 MB/s when compared to the previous MAS series. The drive is also equipped with an 8MB multi-segmented data buffer combined with a 32-bit wide internal data path for faster data access.

The MAX RC series supports a 3Gbps SAS interface which offers new performance, scalability and reliability advantages over it's parallel SCSI predesessor.

Leading edge technology enables industry leading performance specifications blended with the latest advances in interface technology, to provide a cost effective storage solution that meets the most demanding enterprise storage requirements.

Full Specifications

  Formatted storage capacity 73.5 GB
  Form Factor 3.5-inch x 1-inch high 
  Mounting screws 6#32UNC 
  Seek time (track to track) Read 0.2 / Write 0.4 milliseconds
  Seek time (average) 3.3/3.8 milliseconds (read/write)
  Seek time (full track) 8.0/9.0 milliseconds (read/write)
  Average latency time 2.00 milliseconds
  Rotational speed 15,000 RPM
  Data Buffer Size 8 MB
  Recording code 32/34 MEEPRML 
  Interface SAS (3Gbps) 
  Head positioning method ROTARY VCM 
  Spindle start time 30 seconds typical
  Spindle stop time 30 seconds typical
  Power requirement Idle (ready) 11.5 W (typical)
  Height 25.4 millimetres
  Width 101.6 millimetres
  Depth 146.0 millimetres
  Weight 0.75 kg
  Ambient temperature (operating) 5 to 55 degrees C
  Ambient temperature (non-operating) -40 to 70 degrees C
  Maximum DE surface temperature (operating) 55 max deg. C
  Gradient 15 degrees C per hour
  Relative humidity (operating) 5 to 95 % RH (non-condensing)
  Relative humidity (non-operating) 5 to 95 % RH (non-condensing)
  Maximum wet bulb 29 degrees C (non-condensing)
  Vibration (operating) 0.6mm (5 to 20 Hz)/ 1.0G (20 to 300 Hz) 
  Vibration (non-operating) 3.1mm (5 to 20 Hz)/ 5.0G (20 to 300Hz) 
  Shock (operating) 65G Max (2ms) 
  Shock (non-operating) 250G Max (2ms) 
  Altitude (operating) 3,000 metres
  Altitude (non-operating) 12,000 metres
  Acoustic noise (at 1 metre idle) 3.6 bels
  MTBF (Mean Time Between Failures) 1,200,000 power on hours
  Component life (years)
Design life used to calculate MTBF. NOT Warranty
5 years
  Unrecoverable errors 1 per 10^15 bits read
  Seek errors 10 per 10^8 seeks

Varer som er tilgjengelig på lager, sendes normalt innen 5 dager. Bildet kan avvike fra produktet. Vi tar forbehold mot trykkfeil og endringer av priser og spesifikasjoner uten varsel