|
1. LGA1700 socket: Support for 12th Generation Intel® Core™ i9 processors/Intel® Core™ i7 processors/Intel® Core™ i5 processors |
(Go to GIGABYTE's website for the latest CPU support list.) |
2. L3 cache varies with CPU |
(Please refer to "CPU Support List" for more information.)
|
|
1. Intel® Z690 Express Chipset |
|
1. Support for DDR5 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 MHz memory modules |
2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory |
3. Dual channel memory architecture |
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
6. Support for Extreme Memory Profile (XMP) memory modules |
(Please refer "Memory Support List" for more information.)
|
|
Integrated Graphics Processor-Intel® HD Graphics support:
|
1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz |
* Support for DisplayPort 1.2 version and HDCP 2.3 |
(Graphics specifications may vary depending on CPU support.)
|
|
1. Realtek® ALC4080 CODEC |
2. High Definition Audio |
3. 2-channel analog output |
4. Support for S/PDIF Out |
7.1-channel digital signals |
* Actual output of digital signals may vary depending on the playback content and software used, and an external DAC is required. |
|
1. Intel® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) |
Wireless Communication module
|
Intel® Wi-Fi 6 AX200:
|
1. WIFI a, b, g, n, ac, ax, supporting 2.4/5 GHz Dual-Band |
2. BLUETOOTH 5.2 |
3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate |
* Actual data rate may vary depending on environment and equipment. |
|
1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
(The PCIEX16 slot conforms to PCI Express 5.0 standard.) |
2. 2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2) |
(The PCIEX4 slots conform to PCI Express 3.0 standard.) |
Multi-Graphics Technology
|
1. Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies |
|
CPU:
|
1. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) |
Chipset: |
1. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 4.0 x4/x2 SSD support) (M2C_SB) |
2. 2 x M.2 connectors (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2P_SB/M2Q_SB) |
3. 6 x SATA 6Gb/s connectors |
Support for RAID 0, RAID 1, RAID 5, and RAID 10 |
* Refer to "2-8 Internal Connectors," for the installation notices for the M.2 and SATA connectors. |
Intel® Optane™ Memory Ready |
* System acceleration with Intel® Optane™ Memory can only be enabled on the M.2 connectors supported by the Chipset.
|
|
Chipset:
|
1. 2 x USB Type-C® ports, with USB 3.2 Gen 2x2 support (1 port on the back panel, 1 port available through the internal USB header) |
2. 4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel |
Chipset+2 USB 3.2 Gen 1 Hubs: |
1. 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header) |
Chipset+2 USB 2.0 Hub: |
1. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) |
|
1. 1 x 24-pin ATX main power connector |
2. 1 x 8-pin ATX 12V power connector |
3. 1 x 4-pin ATX 12V power connector |
4. 1 x CPU fan header |
5. 1 x water cooling CPU fan header |
6. 4 x system fan headers |
7. 2 x system fan/water cooling pump headers |
8. 2 x addressable LED strip headers |
9. 2 x RGB LED strip headers |
10. 4 x M.2 Socket 3 connectors |
11. 6 x SATA 6Gb/s connectors |
12. 1 x front panel header |
13. 1 x front panel audio header |
14. 1 x USB Type-C® header, with USB 3.2 Gen 2x2 support |
15. 1 x USB 3.2 Gen 1 header |
16. 2 x USB 2.0/1.1 headers |
17. 1 x noise detection header |
18. 2 x Thunderbolt™ add-in card connectors |
19. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) |
20. 1 x power button |
21. 1 x reset button |
22. 1 x Q-Flash Plus button |
23. 2 x temperature sensor headers |
24. 1 x reset jumper |
25. 1 x Clear CMOS jumper |
*All fan headers are subject to support AIO_Pump, Pump and high performance fan with the capability of delivering up to 2A/12V @ 24W.
|
|
1. 1 x USB Type-C® port, with USB 3.2 Gen 2x2 support |
2. 4 x USB 3.2 Gen 2 Type-A ports (red) |
3. 4 x USB 3.2 Gen 1 ports |
4. 4 x USB 2.0/1.1 ports |
5. 2 x SMA antenna connectors (2T2R) |
6. 1 x DisplayPort |
7. 1 x RJ-45 port |
8. 1 x optical S/PDIF Out connector |
9. 2 x audio jacks |
|
1. iTE® I/O Controller Chip |
|
1. Voltage detection |
2. Temperature detection |
3. Fan speed detection |
4. Water cooling flow rate detection |
5. Fan fail warning |
6. Fan speed control |
* Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. |
7. Noise detection |
|
1. 1 x 256 Mbit flash |
2. Use of licensed AMI UEFI BIOS |
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
|
1. Support for APP Center |
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. |
@BIOS |
EasyTune |
Fast Boot |
Game Boost |
ON/OFF Charge |
RGB Fusion |
Smart Backup |
System Information Viewer |
2. Support for Q-Flash Plus |
3. Support for Q-Flash |
4. Support for Xpress Install |
|
1. Norton® Internet Security (OEM version) |
2. cFosSpeed |
|
1. Support for Windows 10 64-bit |
|
1. ATX Form Factor; 30.5cm x 24.4cm
|