Kontakt oss   |   Support   |   Salgsvilkår   |   FAQ - ofte stilte spørsmål   |   Hvordan handle   |   Sikkerhet   |   Om oss   |   Ledig stilling


Black Friday

Rabattkoder

 

 

 

Test av norske nettbutikker

 


Du er her // Forsiden // DATAUTSTYR // Nettverk // Forsterker/Range Extender //
EDIMAX
ET-912MSC+

EDIMAX ET-912MSC+

Varenr: ET-912MSC+
Lokalt lager: 1 stk på lager (sendes normalt samme dag)
Frakt: 79,- Sjekk din fraktpris
Frakt
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
434,-  inkl. mva
Kjøp
Produktinfo

10/100 to 100FX Multi Mode 2KM-SC


ET-912MSC+

Wavelength 850nm /1310nm

Best media conversion solutions for network connectivity
Edimax's full series of Media Converter are designed to meet the needs for massive optical fiber network, provide the whole Ethernet / Fast Ethernet network implementation.

Migrating between copper and fiber-based Medium
ET-912+ series convert the signals between two different transmission medium, allowing user a simple and cost-effective method to migrate between UTP cable and fiber optic cable. It can transmit signals up to 2km (multimode) and 30/40/60/80/100km (single-mode) in fiber medium, allowing users to extend network.

Comply with IEEE Standards
ET-912+ series are fully compliant with IEEE 802.3 10 Base-T and 802.3u 100 Base-TX, 100 Base-FX standards. The device comes with one RJ-45 port to connect to a 10/100 Base-TX device such as workstation or switch and one fiber connection to connect a 100 Base-FX device.

Built in Switching ASIC
ET-912+ series have turned the function more like a 2 ports switch than a traditional converter. User can get all switching benefits such as frames checking and filtering.

Feature LED and Fiber link alarm
User could monitor the device through Feature LED. In addition, Fiber Link Alarm could allow user to monitor and maintain their critical fiber link more effectively.

Unique voltage supervisor
Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V, this action can make sure fiber port and TP port work normally when thunder storm or power unstable occuring cause the power electricity suddenly down in an instant time.

Plug-and-Play Installation
Simply to plug the TP and fiber port to the device having the media convertibility.

Features

  • Compliant with IEEE 802.3 10 BaseT and IEEE 802.3u 100 Base TX/100 Base FX Standards
  • One 10/100 BaseTX Ethernet TP Port and One 100Base FX Ethernet Fiber Port
  • One 100Base FX Fiber Port can support either Multi (SC/ST) or Single (SC, LC, MT-RJ) Mode
  • TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation
  • Providing a slide switch for Full- and Half-Duplex selection on FX Port
  • Multiple Fiber Connectors
  • Providing 19" Converter Chassis for up to 16 slots with redundant power supply for optional expansion use

Specifications

Standards

IEEE 802.3 10BaseT
IEEE 802.3u 100Base TX/100 BaseFX

Features

Number of Ports:
1 10/100 BaseT with RJ-45 Connector
1 100 BaseFX with Fiber Connector (Multi/Single Mode, ST/SC, LC, MT-RJ Connector)

Data Transfer Rate

Ethernet: 10Mbps/Half-Duplex
20Mbps/Full-Duplex
Fast Ethernet: 100Mbps/Half-Duplex
200Mbps/Full-Duplex

Transmission Media

10BaseT Cat. 3, 4, 5 UTP/STP, up to
100Base TX Cat. 5 UTP/STP, up to
100Base FX:
50/125μm or 62.5/125μm Multi Mode ST/SC-Type Fiber optic cable, up to
9/125μm or 10/125μm Single Mode Fiber optic cable

LED Indicators

Per Port:
(TX): Link/Act, Speed, FDX/COL
(FX): Link/Act, FDX/COL
Per Unit: Power

Power Requirement

DC5V/2A

Power Consumption

10 Watts (Max)

Dimensions

102 x 74 x 22mm(L x W x H)

Weight

230 g

Operating Temperature

0 to 60 ℃

Storage Temperature

-20 to 90 ℃

Humidity

10 to 90% RH (non-condensing)

Certifications

FCC Class B, CE


Varer som er tilgjengelig på lager, sendes normalt innen 5 dager. Bildet kan avvike fra produktet. Vi tar forbehold mot trykkfeil og endringer av priser og spesifikasjoner uten varsel