Kontakt oss   |   Support   |   Salgsvilkår   |   FAQ - ofte stilte spørsmål   |   Hvordan handle   |   Sikkerhet   |   Om oss   |   Ledig stilling


Rabattkoder

 

 

 

Test av norske nettbutikker

 


Du er her // Forsiden // //
CRUCIAL
Ballistix Tracer DDR3-1866 8GB Kit

CRUCIAL Ballistix Tracer DDR3-1866 8GBKit

Varenr: BLT2CP4G3D1869DT2TXO
Lagerstatus: Forventet på lager 07.01.2017
Ekspertomtaler: 8 omtaler
Frakt: 49,- Sjekk din fraktpris
Frakt
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
861,-  inkl. mva
Kjøp
    Produktinfo

    Corsair Ballistix Tracer memory is specifically built for performance enthusiasts and case modders who want to push the performance envelope while adding flash appeal to their boxes. The Ballistix line of high-performance memory modules features advanced speed grades, low latencies, and integrated aluminum heat spreaders. And, Ballistix Tracer memory is available in variety of colors depending on technology.

    DDR3 Ballistix Tracer has been updated with more LEDs (up to 32 total) with one or two rows of 12 activity-indicating LEDs along the entire top length of the module. The wider spacing and pattern moves from the center toward the outside of the module and creates some interesting light patterns and effects in your case. Eight constantly illuminated ground effects lights along the bottom edge will light up your motherboard. DDR3 Ballistix Tracer is available in classic black, as well as red, all blue or all green (PCB/heat spreader/LEDs). Show the world your true colors by picking scheme that suits your style or matches your rig.

    What is a Ballistix Tracer DDR3 240-pin DIMM?
    A Ballistix Tracer dual inline memory module (DIMM) consists of a number of memory components that are attached to a black printed circuit board. The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.

    Ballistix Tracer 240-pin DIMMs are used to provide DDR3 SDRAM memory for desktop computers. DDR3 is a leading-edge generation of memory with an improved architecture that allows it to transmit data very fast.

    To use DDR3 memory, your system motherboard must have 240-pin DIMM slots and a DDR3-enabled chipset. A DDR3 SDRAM DIMM will not fit into a standard SDRAM DIMM socket or a DDR of DDR2 DIMM socket.

    The number of black components on a Ballistix Tracer 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. Ballistix Tracer 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. These 240-pin DDR3 DIMMs have only one notch within the row of pins, and each technology has the notch in a slightly different location on the module.


    Varer som er tilgjengelig på lager, sendes normalt innen 5 dager. Bildet kan avvike fra produktet. Vi tar forbehold mot trykkfeil og endringer av priser og spesifikasjoner uten varsel