Kontakt oss   |   Support   |   Salgsvilkår   |   FAQ - ofte stilte spørsmål   |   Hvordan handle   |   Sikkerhet   |   Om oss   |   Ledig stilling


Black Friday

Rabattkoder

 

 

 

Test av norske nettbutikker

 


Du er her // Forsiden // //
CISCO
WAP351 DUAL RADIO 802.11N ,4 + 5 GHZ ACCESS POINT + 5 PORT IN WRLS

CISCO WAP351 DUAL RADIO 802.11N,4 + 5 GHZ ACCESS POINT + 5 PORT IN WRLS

Varenr: WAP351-E-K9
Leverandørlager: 20+ på lager(sendes normalt etter 3-4 arbeidsdager)
Frakt: 79,- Sjekk din fraktpris
Frakt
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
2 067,-  inkl. mva
Fra 209,-/mnd (13 mnd)
Utsett betalingen i 4-6 mnd
Velg finansiering i kassen
Kjøp
Produktinfo

WAP351-E-K9

Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (ETSI)

WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch


As your employees become more mobile and collaborative, they need dependable, business-class access to network applications throughout the office. Extend secure, high-performance mobile networking to them and guests simply and cost-effectively with the Cisco® WAP351 Wireless-N Dual Radio Access Point. This flexible solution lets you connect dozens of employees, and can scale to accommodate additional users and changing business needs.

The Cisco WAP351 Wireless-N Dual Radio Access Point uses concurrent dual-band radios for improved coverage and user capacity. The 5-port Gigabit Ethernet switch allows more devices to be connected to the access point (AP) and allows the AP to be powered by the backbone switch, also helping reduce cabling and wiring costs. Intelligent quality-of-service (QoS) features let you prioritize bandwidth-sensitive traffic for voice-over-IP (VoIP) and video applications.

To provide secure guest access to visitors and other users, the Cisco WAP351 Wireless-N Dual Radio Access Point supports a captive portal with multiple authentication options and the ability to configure rights, roles, and bandwidth. A customized guest login page lets you present a welcome message and access details, and reinforces your brand with company logos.

Cisco WAP351 Wireless-N Dual Radio Access Points are easy to set up and use, with intuitive wizard-based configuration to get you up and running in minutes. An attractive design with flexible mounting options enables the access points to smoothly blend into any small business environment.

To enhance reliability and safeguard sensitive business information, the Cisco WAP351 Wireless-N Dual Radio Access Point supports both Wi-Fi Protected Access (WPA) Personal and Enterprise, encoding all your wireless transmissions with powerful encryption. In addition, 802.1 X RADIUS authentications help keep unauthorized users out.

Designed to scale smoothly as your organization grows, the access points feature controllerless Single Point Setup that simplifies the deployment of multiple access points without additional hardware. With the Cisco WAP351 Wireless-N Dual Radio Access Point, you can extend business-class wireless networking to employees and guests anywhere in the office, with the flexibility to meet new business needs for years to come.

Features

  • Concurrent dual-band radio supports up to 300 Mbps per radio to maximize capacity and coverage.
  • Single Point Setup, a controllerless technology, simplifies the deployment and management of multiple access points - without requiring additional hardware.
  • Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue-access-point detection, helps protect sensitive business information.
  • Captive portal enables highly secure, customized guest access with multiple rights and roles.
  • Simple installation and intuitive web-based configuration and wizard enable fast, simple deployment and setup in minutes.
  • 5- Port Gigabit Ethernet LAN Switch supports both PD and PSE, allowing IP devices and the AP to be powered by a backbone switch.
  • Sleek design with multiple internal antennas and versatile mounting kit enables installation on a ceiling, wall, or desktop.
  • Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance.
  • Power-saving sleep mode and port control features help maximize energy efficiency.
  • Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network.
  • Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades.
  • Limited lifetime hardware warranty provides peace of mind.

Specifications

Specifications

Description

Standards

IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)

Cabling type

Category 5e or better

Antennas

Internal antennas optimized for installation on a wall or ceiling

LED indicators

Power, WLAN, LAN

Operating system

Linux

Physical Interfaces

Ports

5 10/100/1000 Ethernet, with support for 802.3af /at PoE, Power Port for AC adapter (not included)

Power Supply

802.3af/at PoE and External 48V/1.25A DC power adapter (not included)

Buttons

Reset button, Power On/Off

Lock slot

Slot for Kensington lock

Physical Specifications

Physical dimensions (W x D x H)

9.055 x 9.055 x 1.575 in. (230 x 230 x 40 mm)

Weight

1.34 lb or 0.607 kg

Network Capabilities

VLAN support

Yes

Number of VLANs

1 management VLAN plus 16 VLANs for SSIDs

802.1X supplicant

Yes

SSID-to-VLAN mapping

Yes

Auto channel selection

Yes

Spanning Tree

Yes

Load balancing

Yes

IPv6

Yes

  IPv6 host support
  IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.

Layer 2

802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN

Security

WPA/WPA2

Yes, including Enterprise authentication

Access control

Yes, management access control list (ACL) plus MAC ACL

Secure management

HTTPS

SSID broadcast

Yes

Rogue-access-point detection

Yes

Mounting and Physical Security

Multiple mounting options

Mounting bracket included for easy ceiling or wall mounting

Physical security lock

Kensington lock slot

Quality of Service

Quality of service (QoS)

Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS

Performance

Wireless throughput

Up to 300-Mbps data rate (real-world throughput will vary)

Recommended user support

32 active clients/users per radio

Multiple-Access Point Management

Single Point Setup

Yes

Number of access points per cluster

8

Active clients per cluster

240

Configuration

Web user interface

Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

Management

Management protocols

Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour

Remote management

Yes

Event logging

Local, remote syslog, email alerts

Network diagnostics

Logging and packet capture

Web firmware upgrade

Firmware upgradable through web browser, imported/exported configuration file

Dynamic Host Configuration Protocol (DHCP)

DHCP client

IPv6 host

Yes

HTTP redirect

Yes

Wireless

Frequency

Dual concurrent radios (2.4 and 5 GHz)

Radio and modulation type

Dual radio, orthogonal frequency division multiplexing (OFDM)

WLAN

802.11n

2x3 multiple-input multiple-output (MIMO) with 2 spatial streams on 2.4 GHz

2x2 multiple-input multiple-output (MIMO) with 2 spatial streams on 5 GHz

20, and 40 MHz for 802.11n

PHY data rate up to 600 Mbps

Data rates supported

802.11a/b/g:

  54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
  802.11n: 6.5 to 300 Mbps
   20-MHz bandwidth: MCS 0-15 for supported data rates
   40-MHz bandwidth: MCS 0-15 for supported data rates

Frequency band and 20-MHz operating channels

A Regulatory Domain:

  2.412 to 2.462 GHz; 11 channels
  5.180 to 5.240 GHz; 4 channels
  5.745 to 5.825 GHz; 5 channels

E Regulatory Domain:

  2.412 to 2.472 GHz; 13 channels
  5.180 to 5.240 GHz; 4 channels

 

C Regulatory Domain:

  2.412 to 2.462 GHz; 11 channels
  5.745 to 5.805 GHz; 4 channels

Nonoverlapping channels

2.4 GHz

  802.11b/g
   20 MHz: 3
  802.11n
   20 MHz: 3

5 GHz

  802.11a
   20 MHz: 9
  802.11n
   20 MHz: 9
   40 MHz: 4

Wireless isolation

Wireless isolation between clients

External antennas

None

Internal antennas

Internal Fixed PiFA Antenna

Antenna gain in dBi

Maximum antenna gain of 5.3 dBi on 2.4 GHz

Maximum antenna gain of 5.1 dBi on 5 GHz

Wireless distribution system (WDS)

Yes

Roaming

802.11i only

Multiple SSIDs

16

Wireless VLAN map

Yes

WLAN security

Yes

Wi-Fi Multimedia (WMM)

Yes, with unscheduled automatic power save

Operating Modes

Access point

Access Point mode, WDS Bridging, Workgroup Bridge mode

Environmental

Power options

IEEE 802.3af/af Ethernet switch

Cisco Power Injector - SB-PWR-INJ2-xx

AC Adapter - SB-PWR-48V-xx (not included)

PoE power:

Peak PoE power: 18W

Compliance

Safety:

  UL 60950-1
  CAN/CSA-C22.2 No. 60950-1
  IEC 60950-1
  EN 60950-1

Radio approvals:

  FCC Part 15.247, 15.407
  RSS-210 (Canada)
  EN 300.328, EN 301.893 (Europe)
  AS/NZS 4268.2003 (Australia and New Zealand)

EMI and susceptibility (Class B):

  FCC Part 15.107 and 15.109
  ICES-003 (Canada)
  EN 301.489-1 and -17 (Europe)

Operating temperature

0° to 40°C (32° to 104°F)

Storage temperature

-20° to 70°C (-4° to 158°F)

Operating humidity

10% to 85% noncondensing

Storage humidity

5% to 90% noncondensing

System memory

128-MB RAM

128-MB Flash

Package Contents

  CiscoWAP351 Wireless-N Dual Radio Access Point
  Ceiling-/wall-mounting kit
  User guide on CD-ROM
  Quick-start guide
  Ethernet network cable

Minimum Requirements

  Switch or router with PoE support, PoE injector, or AC Power Adapter
  Web-based configuration: Java-enabled web browser

Warranty

Access point

Limited lifetime


Varer som er tilgjengelig på lager, sendes normalt innen 5 dager. Bildet kan avvike fra produktet. Vi tar forbehold mot trykkfeil og endringer av priser og spesifikasjoner uten varsel