Kontakt oss   |   Support   |   Salgsvilkår   |   FAQ - ofte stilte spørsmål   |   Hvordan handle   |   Sikkerhet   |   Om oss   |   Ledig stilling


Rabattkoder

 

 

 

Test av norske nettbutikker

 


Du er her // Forsiden // //
CISCO
CATALYST 4500 1000W POWER SUPPLY SPARE DATA ONLY US

CISCO CATALYST 4500 1000W POWERSUPPLY SPARE DATA ONLY US

Cisco - Power supply - 1000 Watt
Varenr: PWR-C45-1000AC=
Lagerstatus: Forventet på lager 12.01.2017
Frakt: 87,- Sjekk din fraktpris
Frakt
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
7 289,-  inkl. mva
Fra 220,-/mnd (75 mnd)
Utsett betalingen i 4-6 mnd
Velg finansiering i kassen
Kjøp
Produktinfo

Cisco Catalyst 4500 Series Power-over-Ethernet Capabilities and Power Supplies

Cisco Catalyst 4500 E-Series Power-Supply Options: AC and DC
The Cisco Catalyst 4500 E-Series offers a variety of power supplies and accessories to meet the diverse needs of enterprise and service provider customers. All available Cisco Catalyst 4500 Series power supplies can be used for data-only deployments, which typically require just a few hundred watts. For deployments that dictate support for PoE power, Cisco offers several options.
The Cisco Catalyst 4500 E-Series offers AC power with several internal supplies: 1000W (data only), 1400W (data only), 1300W (data and PoE), 2800W (data and PoE), and 4200W (data and PoE). When 5500W or less are required, the 4200W power supply can provide 5500W while protecting the chassis from a power or power-supply sub-unit failure. When more than 5500W of redundant data and PoE are required for a Cisco Catalyst 4500 Series chassis in an AC-powered environment, Cisco offers an external AC power shelf that houses two 2500-WAC power supplies. When two power shelves are combined, they can produce 7500W -- the remaining 2500W supply can be used for N + 1 protection.
The Cisco Catalyst 4500 E-Series has two DC power options -- one is optimized for data-only deployments in service provider central offices (part number PWR-C45-1400DC), and the other is used for high-power PoE deployments (PWR-C45-1400DC-P).

Cisco Catalyst 4500 E-Series External AC Power Shelf and 1400-WDC Power Supply with Integrated Power Entry Module
The Cisco Catalyst 4500 E-Series external AC power shelf must be used in conjunction with the 1400-WDC-P power supply. In addition to providing power for the chassis, fans, and non-PoE line cards, the 1400-WDC power supply contains a power entry module (PEM). The PEM is used to pass additional power through to the chassis backplane -- power demanded by the PoE line cards. The chassis power trace used for PoE is independent from the one used by the supervisor engine(s), fan tray, and backplane components. The 1400-WDC power supply can accept up to 7500 WDC for data and PoE applications. Up to 1400W can be dedicated for data (supervisor[s], fan tray, etc.), while the remaining power is passed through the PEM and is used for PoE.
When only one external AC power shelf is used (with two 2500-WAC power supplies), it provides the 1400-WDC power supply with 5000W of DC power. When two AC power shelves are strapped together, the Cisco Catalyst 4500 Series can provide up to 7500W of DC power (3 + 1 redundant).

Cisco Catalyst 4500 E-Series Service Provider DC Power Supply
The triple-input 1400-WDC power supply is optimized for service provider central-office deployments. By providing multiple inputs, the service provider DC power supply allows central-office technicians to customize the output power to meet their application needs. Many central-office deployments require only a fraction of the 1400W available in the service provider power supply. With low-current inputs, technicians can connect the supply to smaller fuses and breakers. The service provider power supply makes it possible to deploy a Cisco Catalyst 4503 with a single 15A circuit. Likewise, it is possible to deploy a fully populated Cisco Catalyst 4510R with one 15A and two 20A circuits rather than a single 60A connection, which often requires rack rewiring

Power Supply

1000 WAC (PWR-C45-1000AC)

1400 WAC (PWR-C45-1400AC)

1400W Triple Input DC (PWR-C45-1400DC)

Minimum Cisco IOS® Software Release required

12.1(12c)EW

12.2(18)EW

12.2(25)EW

Minimum Cisco Catalyst Operating System Software required

7.4(1)

-

-

Integrated PoE

No (data only)

No (data only)

No (data only)

IEEE 802.3af compliant

No

No

No

Input current (rated)

12A at 100 VAC

5A at 240 VAC

16A at 100 VAC

7A at 240 VAC

Two -48 VDC at 15A

One -48 VDC at 12.5A

Output current (data)

12V at 83.4A

3.3V at 12.2A

12V at 113.4A

3.3V at 12.2A

12V at 114W

3.3V at 12.5W

Output current (PoE)

-

-

-

Output power redundant mode (data)

1000W + 40W

1360W + 40W

1368W + 40W

Output power redundant mode (PoE)

-

-

-

Output power combined mode (data)

1667W

-

-

Output power combined mode (PoE)

-

-

-

Heat dissipation

943 BTU/hr

1048 BTU/hr

1048 BTU/hr

Holdup time

20 ms

20 ms

4 ms

Feature

Description

Power-supply indicators and interfaces

• Fan cooling: Integrated in hot-inserting or hot-extraction unit
• Good: Green
• Fail: Red
• Support for Simple Network Management Protocol (SNMP) MIB

Environmental conditions

• Operating temperature: 32 to 104ºF (0 to 40ºC)
• Storage temperature: -40 to 167ºF (-40 to 75ºC)
• Relative humidity: 10 to 90 percent, noncondensing
• Operating altitude: -60 to 2000m

Regulatory Standards Compliance

Safety

• UL 60950
• CAN/CSA-C22.2 No. 60950
• EN 60950
• IEC 60950
• TS 001
• AS/NZS 3260

Electromagnetic Compatibility (EMC)

• FCC Part 15 (CFR 47) Class A
• ICES-003 Class A
• EN55022 Class A
• CISPR22 Class A
• AS/NZS 3548 Class A
• VCCI Class A
• EN 55022
• EN 55024
• EN 61000-6-1
• EN 50082-1
• EN 61000-3-2
• EN 61000-3-3
• ETS 300 386

Industry EMC, safety, and environmental standards

• GR-63-Core Network Equipment Building Standards (NEBS) Level 3
• GR-1089-Core Level 3
• ETS 300 019 Storage Class 1.1
• ETS 300 019 Transportation Class 2.3 (pending)
• ETS 300 019 Stationary Use Class 3.1
• ETS 300 386

Warranty

The warranty for the Cisco Catalyst 4500 Series is 90 days; it includes hardware replacement with a 10-day turnaround from return materials authorization (RMA).

Service and support

Cisco offers lifecycle service and support for the Cisco Catalyst 4500 Series, directly and for resale through Cisco distributors. From implementation to operation and optimization, Cisco offers advanced service and technical support.

Advanced service

Cisco Total Implementation Solutions (TIS) offers a full range of implementation solutions, including project management, project engineering, configuration, and staging and rollout coordination; Cisco TIS helps ensure correct installation and deployment. For more information about Cisco TIS, visit: http://www.cisco.com/en/US/partner/products/svcs/ps11/services_segment_category_home.html.

Technical support

Cisco SMARTnet® Online and telephone support augments the customer's operations-staff resources. Support includes the ability to refresh system software at will as well as a range of Advance Replacement hardware options. Cisco SMARTnet Onsite support adds the services of a field engineer, services that can be critical when customer staffing is insufficient or unavailable for parts-replacement activities. For more information about Cisco SMARTnet support, visit: http://www.cisco.com/en/US/partner/products/svcs/ps3034/serv_category_home.html.

Part Number

Product Name

PWR-C45-1000AC

Cisco Catalyst 4500 1000 WAC Power Supply (data only)

PWR-C45-1400AC

Cisco Catalyst 4500 1400 WAC Power Supply (data only)

PWR-C45-1300ACV

Cisco Catalyst 4500 1300 WAC Power Supply (PoE)

PWR-C45-2800ACV

Cisco Catalyst 4500 2800 WAC Power Supply (PoE)

PWR-C45-1400DC-P

Cisco Catalyst 4500 1400 WDC Power Supply with PEM (PoE)

PWR-C45-4200ACV

Cisco Catalyst 4500 4200 WAC Power Supply (PoE)

PWR-C45-1400DC

Cisco Catalyst 4500 1400 WDC SP Central-Office Power Supply (triple input)

External AC Power Shelf and Accessories

WS-P4502-1PSU

Cisco Catalyst 4500 Auxiliary Power Shelf (2 slot), including 1 (part number PWR-4502)

PWR-4502

Cisco Catalyst 4500 Auxiliary Power Shelf Redundant Power Supply

CAB-4502-DC-2M

Cisco Catalyst 4500 2 meter DC Cable set for auxiliary power shelf

CAB-4502-DC-60CM

Cisco Catalyst 4500 60 cm DC Cable set for auxiliary power shelf

Tilbehør
CISCO 8FT CEE 7/7 TO
CISCO 8FT CEE 7/7 TO
318,-
Kjøp
CISCO Catalyst 4500 1300W AC
CISCO Catalyst 4500 1300W AC
Cisco - Power supply - hot-plug / redundant ( internal ) ( plug-in module ) - 1300 Watt
7 410,-
Kjøp
CISCO Catalyst 4500 2800W AC
CISCO Catalyst 4500 2800W AC
Cisco - Power supply - 2800 Watt
10 708,-
Kjøp
CISCO Catalyst 4500 1400W AC
CISCO Catalyst 4500 1400W AC
11 395,-
Kjøp


Varer som er tilgjengelig på lager, sendes normalt innen 5 dager. Bildet kan avvike fra produktet. Vi tar forbehold mot trykkfeil og endringer av priser og spesifikasjoner uten varsel