Kontakt oss   |   Support   |   Salgsvilkår   |   FAQ - ofte stilte spørsmål   |   Hvordan handle   |   Sikkerhet   |   Om oss   |   Ledig stilling


Black Friday

Rabattkoder

 

 

 

Test av norske nettbutikker

 


Du er her // Forsiden // //
CISCO
3560 48Port 10/100 + 4 SFP Sta

CISCO 3560 48Port 10/100 + 4SFP Sta

Varenr: WS-C3560V2-48TS-S
Lagerstatus: Forventet på lager 11.01.2017
Frakt: 89,- Sjekk din fraktpris
Frakt
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
39 421,-  inkl. mva
Fra 1.193,-/mnd (53 mnd)
Utsett betalingen i 4-6 mnd
Velg finansiering i kassen
Kjøp
Produktinfo

Cisco Catalyst 3560 v2 Series Switches

The Cisco® Catalyst® 3560 v2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This new series of switches supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560 v2 Series consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video.

Cisco Catalyst 3560 v2 Series Highlights

• Lower power consumption than its predecessors
• Backward compatible - uses the same Cisco IOS® Software image as the 3560 series and has the same feature set
• Full EnergyWise support to monitor energy consumption of network infrastructure and implement energy saving programs to reduce energy costs
• Compatible with Cisco Redundant Power System (RPS) 2300
• All units have a uniform depth of 11.9 inches for better cable management
• Preconfigurable with the Cisco IOS Software release at the time of ordering
• IPv6 routing included in the IP Services feature set
• DC powered stand-alone model

Model

Description

3560V2-24TS

24 Ethernet 10/100 ports and 2 Small Form-Factor Pluggable (SFP)-based Gigabit Ethernet ports; 1 rack unit (RU)

3560V2-48TS

48 Ethernet 10/100 ports and 4 SFP-based Gigabit Ethernet ports; 1RU

3560V2-24PS

24 Ethernet 10/100 ports with PoE and 2 SFP-based Gigabit Ethernet ports; 1 RU

3560V2-48PS

48 Ethernet 10/100 ports with PoE and 4 SFP-based Gigabit Ethernet ports; 1RU

3560V2-24TS-SD

24 Ethernet 10/100 ports and 2 SFP-based Gigabit Ethernet ports; 1RU, DC power supply

Cisco Catalyst 3560 v2 Series Switch Hardware

Description

Specification

Performance

Forwarding bandwidth

32 Gbps

Flash memory

32 MB

Max VLANs

1K

VLAN IDs

4K

Switched Virtual Interfaces (SVIs)

Up to 1000

Maximum transmission unit (MTU)

Up to 9000 bytes

Jumbo frames

9016 bytes

MAC, routing, security, and QoS scalability numbers depend on the type of template used in the switch.

 

Default Template

Access Template

VLAN Template

Routing Template

MAC address

6K

4K

12K

3K

IGMP groups and multicast routes

1K

1K

1K

1K

Total unicast routes

8K

6K

0

11K

Directly connected hosts

6K

4K

0

3K

Indirect routes

2K

2K

0

8K

Security ACEs

1K

2K

1K

1K

QoS ACEs

0.5K

0.5K

0.5K

0.5K

PBR ACEs

0

0.5K

0

0.5K

Connectors and Cabling

• 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
• 10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1,2 (negative) and 3,6 (positive)
• 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling
• 100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins 1,2 (negative) and 3,6 (positive)
• 1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling
• 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
• Cisco Catalyst 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cm
• Management console port: RJ-45-to-DB-9 cable for PC connections; for terminal connections, use RJ-45-to-DB-25 female data-terminal-equipment (DTE) adaptor (can be ordered separately from Cisco; part number ACS-DSBUASYN=)

Power Connectors

• Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 2300. The connectors are located at the back of the switch.
Internal-Power-Supply Connector
• The internal power supply is an autoranging unit.
• The internal power supply supports input voltages between 100 and 240 VAC.
• Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
• Cisco RPS Connector
• The connector offers connection for an optional Cisco RPS 2300 (model PWR-RPS2300) that uses AC input and supplies DC output to the switch.

Indicators

• Per-port status LEDs: Link integrity, disabled, activity, speed, full-duplex indications, PoE applied, PoE error, and PoE disabled indications
• System-status LEDs: System, RPS, link status, link duplex, link speed, and PoE indications

Dimensions
(H x W x D)

 

Inches

Centimeters

3560V2-24TS

1.73 x 17.46x 11.62

4.4 x 44.3 x 29.5

3560V2-48TS

1.73 x 17.46x 11.62

4.4 x 44.3 x 29.5

3560V2-24PS

1.73 x 17.46x 11.62

4.4 x 44.3 x 29.5

3560V2-48PS

1.73 x 17.46x 11.62

4.4 x 44.3 x 29.5

3560V2-24DC

1.73 x 17.46x 11.62

4.4 x 44.3 x 29.5

Weight

 

Pounds

Kilograms

3560V2-24TS

8.2

3.7

3560V2-48TS

9

4

3560V2-24PS

10

4.6

3560V2-48PS

11

5

3560V2-24DC

8

3.7

Environmental Ranges

 

Fahrenheit

Centigrade

Operating temperature

32 to 113ºF

0 to 45ºC

Storage temperature

-13 to 158ºF

-25 to 70ºC

 

Feet

Meters

Operating altitude

Up to 9,843 ft

Up to 3,000 m

Storage altitude

Up to 15,000 ft

Up to 4,573 m

     

Operating relative humidity

10 to 85% noncondensing

Storage relative humidity

10 to 85% noncondensing

Acoustic Noise

ISO 7779 & ISO 9296: Bystander positions operating to an ambient temperature of 25°C

 

Sound Pressure

Sound Power

 

LpA

(Typical)

LpAD

(Maximum)

LwA

(Typical)

LwAD

(Maximum)

3560V2-24TS

41 dB

44 dB

5.1 B

5.4 B

3560V2-48TS

42 dB

45 dB

5.2 B

5.5 B

3560V2-24PS

44 dB

47 dB

5.5 B

5.7 B

3560V2-48PS

45 dB

48 dB

5.5 B

5.8 B

3560V2-24DC

41 dB

44 dB

5.2 B

5.5 B

Typical: Noise emission for a typical configuration and load at 25° C

Maximum: Statistical maximum to account for variation in production

Mean Time Between Failure (MTBF)

3560V2-24TS

377,260 hours

3560V2-48TS

301,886 hours

3560V2-24PS

275,360 hours

3560V2-48PS

206,041 hours

3560V2-24DC

451,606 hours

Power Specifications for Cisco Catalyst 3560 v2 Series Switch

Description

Specification

Power Supply Rated Maximum

 

Switch Power Consumption

Total Output BTU

3560V2-24TS

60W

205 BTU/hour

3560V2-48TS

130W

445 BTU/hour

3560V2-24PS

525W

1796 BTU/hour

3560V2-48PS

525W

1796 BTU/hour

3560V2-24TS-SD

60W

205 BTU/hour

Measured 100% Throughput Power Consumption

 

Switch Power Consumption

Total Output BTU

3560V2-24TS

24W

80 BTU/hour

3560V2-48TS

41W

140 BTU/hour

3560V2-24PS

44W

150 BTU/hour

3560V2-48PS

61W

205 BTU/hour

3560V2-24TS-SD

24W

82 BTU/hour

Measured 5% Throughput Power Consumption

 

Switch Power Consumption

Total Output BTU

3560V2-24TS

22W

72 BTU/hour

3560V2-48TS

37W

124 BTU/hour

3560V2-24PS

41W

140 BTU/hour

3560V2-48PS

56W

188 BTU/hour

3560V2-24TS-SD

22W

75 BTU/hour

Measured 100% Throughput Power Consumption

(with maximum possible PoE loads)

 

Switch Power Consumption

PoE Power

Total Output BTU

3560V2-24PS

435W

370W

220 BTU/hour

3560V2-48PS

452W

370W

280 BTU/hour

Measured 5% Throughput Power Consumption

(with 50% PoE loads)

 

Switch Power Consumption

PoE Power

Total Output BTU

3560V2-24PS

238W

185W

181 BTU/hour

3560V2-48PS

244W

185W

203 BTU/hour

AC/DC Input Voltage and Current

 

Voltage (autoranging)

Current

Frequency

3560V2-24TS

100-240 VAC

0.5A - 0.3A

50-60 Hz

3560V2-48TS

100-240 VAC

0.9A - 0.5A

50-60 Hz

3560V2-24PS

100-240 VAC

5A - 2A

50-60 Hz

3560V2-48PS

100-240 VAC

5A - 2A

50-60 Hz

3560V2-24DC

-36 to -72VDC

0.7A - 0.4A

N/A

DC Output Voltages, Current, & Power consumption from
RPS 2300

 

Switch

Switch Power

PoE

3560V2-24TS

+12V at 2A

24W

N/A

3560V2-48TS

+12V at 3A

36W

N/A

3560V2-24PS

+12V at 2A

24W

-48V at 7.8A

3560V2-48PS

+12V at 3A

36W

-48V at 7.8A

3560V2-24DC

Not supported

N/A

N/A

PoE

• Maximum power supplied per port: 15.4W
• Total power dedicated to PoE: 370W
Management and Standards Support for Cisco Catalyst 3560 v2 Series Switch

Description

Specification

Management

• BRIDGE-MIB
• CISCO-CDP-MIB
• CISCO-CLUSTER-MIB
• CISCO-CONFIG-MAN-MIB
• CISCO-ENTITY-FRU-CONTROL-MIB
• CISCO-ENVMON-MIB
• CISCO-FLASH-MIB
• CISCO-FTP-CLIENT-MIB
• CISCO-HSRP-MIB
• CISCO-HSRP-EXT-MIB
• CISCO-IGMP-FILTER-MIB
• CISCO-IMAGE-MIB
• CISCO-IP-STAT-MIB
• CISCO-L2L3-INTERFACE-CONFIG-MIB
• CISCO-MAC-NOTIFICATION-MIB
• CISCO-MEMORY-POOL-MIB
• CISCO-PAGP-MIB
• CISCO-PING-MIB
• CISCO-PROCESS-MIB
• CISCO-RTTMON-MIB
• CISCO-STP-EXTENSIONS-MIB
• CISCO-SYSLOG-MIB
• CISCO-TCP-MIB
• CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
• CISCO-VLAN-MEMBERSHIP-MIB
• CISCO-VTP-MIB
• ENTITY-MIB
• ETHERLIKE-MIB
• IF-MIB
• IGMP-MIB
• IPMROUTE-MIB
• OLD-CISCO-CHASSIS-MIB
• OLD-CISCO-FLASH-MIB
• OLD-CISCO-INTERFACES-MIB
• OLD-CISCO-IP-MIB
• OLD-CISCO-SYS-MIB
• OLD-CISCO-TCP-MIB
• OLD-CISCO-TS-MIB
• OSPF-MIB (RFC 1253)
• PIM-MIB
• RFC1213-MIB
• RFC1253-MIB
• RMON-MIB
• RMON2-MIB
• SNMP-FRAMEWORK-MIB
• SNMP-MPD-MIB
• SNMP-NOTIFICATION-MIB
• SNMP-TARGET-MIB
• SNMPv2-MIB
• TCP-MIB
• UDP-MIB

Standards

• IEEE 802.1s
• IEEE 802.1w
• IEEE 802.1x
• IEEE 802.3ad
• IEEE 802.3af
• IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.1p CoS Prioritization
• IEEE 802.1Q VLAN
• IEEE 802.3 10BASE-T specification
• IEEE 802.3u 100BASE-TX specification
• IEEE 802.3ab 1000BASE-T specification
• IEEE 802.3z 1000BASE-X specification
• 1000BASE-X (SFP)
• 1000BASE-SX
• 1000BASE-LX/LH
• 1000BASE-ZX
• 1000BASE-CWDM SFP 1470 nm
• 1000BASE-CWDM SFP 1490 nm
• 1000BASE-CWDM SFP 1510 nm
• 1000BASE-CWDM SFP 1530 nm
• 1000BASE-CWDM SFP 1550 nm
• 1000BASE-CWDM SFP 1570 nm
• 1000BASE-CWDM SFP 1590 nm
• 1000BASE-CWDM SFP 1610 nm
• RMON I and II standards
• SNMPv1, SNMPv2c, and SNMPv3
Safety and Compliance

Description

Specification

Safety Certifications

• UL 60950-1, First Edition
• CUL to CAN/CSA 22.2 No. 60950-1, First Edition
• TUV/GS to EN 60950-1, First Edition
• CB to IEC 60950-1 with all country deviations
• NOM (through partners and distributors)
• CE Marking

Electromagnetic Emissions Certifications

• FCC Part 15 Class A
• EN 55022 Class A (CISPR22)
• EN 55024 (CISPR24)
• AS/NZS CISPR22 Class A
• CE
• KCC
• GOST
• China EMC Certifications

Telco

Common Language Equipment Identifier (CLEI) code

Warranty

Limited Lifetime Warranty

Ordering Information

Part Numbers

Description

WS-C3560V2-24TS-S

• 24 Ethernet 10/100 ports and 2 SFP-based Gigabit Ethernet ports
• 1RU fixed-configuration, multilayer switch
• IPv6
• IP Base software feature set

WS-C3560V2-24TS-SD

• 24 Ethernet 10/100 ports and 2 SFP-based Gigabit Ethernet ports
• 1RU fixed-configuration, multilayer switch
• IPv6
• IP Base software feature set
• DC power supply

WS-C3560V2-24TS-E

• 24 Ethernet 10/100 ports and 2 SFP-based Gigabit Ethernet ports
• 1RU fixed-configuration, multilayer switch
• IPv6
• IP Services software feature set

WS-C3560V2-48TS-S

• 48 Ethernet 10/100 ports and 4 SFP-based Gigabit Ethernet ports
• 1RU fixed-configuration, multilayer switch
• IPv6
• IP Base software feature set

WS-C3560V2-48TS-E

• 48 Ethernet 10/100 ports and 4 SFP-based Gigabit Ethernet ports
• 1RU fixed-configuration, multilayer switch
• IPv6
• IP Services software feature set

WS-C3560V2-24PS-S

• 24 Ethernet 10/100 ports and 2 SFP-based Gigabit Ethernet ports
• 370W available for PoE, allowing 15.4W to all ports
• 1RU fixed-configuration, multilayer switch
• IPv6
• IP Base software feature set

WS-C3560V2-24PS-E

• 24 Ethernet 10/100 ports and 2 SFP-based Gigabit Ethernet ports
• 370W available for PoE, allowing 15.4W to all ports
• 1RU fixed-configuration, multilayer switch
• IPv6
• IP Services software feature set

WS-C3560V2-48PS-S

• 48 Ethernet 10/100 ports and 4 SFP-based Gigabit Ethernet ports
• 370W available for PoE, allowing full 15.4W for up to 24 ports
• 1RU fixed-configuration, multilayer switch
• IPv6
• IP Base software feature set

WS-C3560V2-48PS-E

• 48 Ethernet 10/100 ports and 4 SFP-based Gigabit Ethernet ports
• 370W available for PoE, allowing full 15.4W for up to 24 ports
• 1RU fixed-configuration, multilayer switch
• IPv6
• IP Base software feature set

WS-C3560V2-48PS-SM

• 3-pack of WS-C3560V2-48PS-S
• 48 Ethernet 10/100 ports and 4 SFP-based Gigabit Ethernet ports
• 370W available for PoE, allowing full 15.4W for up to 24 ports
• IP Base software feature set
• Includes 3 sets of mechanical accessory kits and power cords
• Includes 1 console cable

Cisco Catalyst 3560 v2 Series Cisco IOS Software upgrade options

CD-3560-EMI=

• IP Services upgrade for the Cisco Catalyst 3560 v2 series switches
• Advanced IP routing for IPv4 and IPv6

Cisco Redundant Power System 2300

PWR-RPS2300

Cisco RPS 2300 with one connector cable

CAB-RPS2300-E=

Spare RPS 2300 cable for Cisco Catalyst 3560 v2, 3750 v2, 3560-E, 3750-E, and 2960 PoE series switches

C3K-PWR-750WAC=

Spare 750WAC power supply for the RPS 2300 and Cisco Catalyst 3560-E/3750-E series switches

C3K-PWR-1150WAC=

Spare 1150WAC power supply for the RPS 2300 and Cisco Catalyst 3560-E/3750-E series switches

Spare rack mount kits for the Cisco Catalyst 3560 v2 Series

RCKMNT-1RU=

Spare rack-mount kit for the Cisco Catalyst 3560 and 3750 series

RCKMNT-REC-1RU=

1RU recessed rack-mount kit for the Cisco Catalyst 3560 and 3750 series

Spare power cords for the Cisco Catalyst 3560 v2 Series

CAB-AC=

Standard power cord. 125V, 10A, 2.1 meters

CAB-16AWG-AC=

Standard power cord. 125V, 13A, 2.5 meters

CAB-ACE=

Europe. 250V, 10A, 2.5 meters

CAB-ACI=

Italy. 250V, 10A, 2.5 meters

CAB-ACU=

UK and Hong Kong. 250V, 10A, 2.5 meters

CAB-ACA=

Australia and China. 250V, 10A, 2.5 meters

CAB-ACS=

Switzerland. 250V, 10A, 2.5 meters

CAB-ACR=

Argentina. 250V, 10A, 2.5 meters

CAB-JPN=

Japan. 125V, 12A, 2.5 meters

CAB-IND-10A=

India. 250V, 10A, 2.5 meters

CAB-C13-C14-AC=

Power cord with C14 connector. 250V, 10A, 3.0 meters

SFP optic modules for the Cisco Catalyst 3560 v2 Series

GLC-LH-SM=

1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength

GLC-SX-MM=

1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength

GLC-ZX-SM=

1000BASE-ZX SFP transceiver module for SMF, 1550-nm wavelength

GLC-T=

1000BASE-T SFP transceiver module for Category 5 copper wire

Not supported on the Cisco Catalyst 3560-8PC compact switch

GLC-BX-D=

1000BASE-BX10 SFP transceiver module for single strand SMF, 1490-nm TX/1310-nm RX wavelength

GLC-BX-U=

1000BASE-BX10 SFP transceiver module for single strand SMF, 1310-nm TX/1490-nm RX wavelength

GLC-GE-100FX=

• 100BASE-FX SFP transceiver module for Gigabit Ethernet ports, 1310 nm wavelength, 2 km over MMF
• Not supported on the Cisco Catalyst 3560-8PC compact switch

GLC-FE-100FX=

• 100BASE-FX SFP transceiver module for 100-Mb ports, 1310 nm wavelength, 2 km over MMF
• Only supported on the Cisco Catalyst 3560-8PC compact switch

GLC-FE-100LX=

• 100BASE-FX SFP transceiver module for 100-Mb ports, 1310 nm wavelength, 10 km over SMF
• Only supported on the Cisco Catalyst 3560-8PC compact switch

GLC-FE-100BX-D=

• 100BASE-BX10-D SFP transceiver module for 100-Mb ports, 1550 nm TX/1310 nm RX wavelength, 10 km over single-strand SMF
• Only supported on the Cisco Catalyst 3560-8PC compact switch

GLC-FE-100BX-U=

• 100BASE-BX10-U SFP transceiver module for 100-Mb ports, 1310 nm TX/1550 nm RX wavelength, 10 km over single-strand SMF
• Only supported on the Cisco Catalyst 3560-8PC compact switch

CWDM-SFP-1470=

Cisco CWDM SFP 1470 nm; Gigabit Ethernet and 1G/2G FC (gray)

CWDM-SFP-1490=

Cisco CWDM SFP, 1490 nm; Gigabit Ethernet and 1G/2G FC (violet)

CWDM-SFP-1510=

Cisco CWDM SFP, 1510 nm; Gigabit Ethernet and 1G/2G FC (blue)

CWDM-SFP-1530=

Cisco CWDM SFP, 1530 nm; Gigabit Ethernet and 1G/2G FC (green)

CWDM-SFP-1550=

Cisco CWDM SFP, 1550 nm; Gigabit Ethernet and 1G/2G FC (yellow)

CWDM-SFP-1570=

Cisco CWDM SFP, 1570 nm; Gigabit Ethernet and 1G/2G FC (orange)

CWDM-SFP-1590=

Cisco CWDM SFP, 1590 nm; Gigabit Ethernet and 1G/2G FC (red)

CWDM-SFP-1610=

Cisco CWDM SFP, 1610 nm; Gigabit Ethernet and 1G/2G FC (brown)

DWDM-SFP-3033=

DWDM SFP 1530.33 nm SFP (100 GHz ITU grid)

DWDM-SFP-3112=

DWDM SFP 1531.12 nm SFP (100 GHz ITU grid)

DWDM-SFP-3190=

DWDM SFP 1531.90 nm SFP (100 GHz ITU grid)

DWDM-SFP-3268=

DWDM SFP 1532.68 nm SFP (100 GHz ITU grid)

DWDM-SFP-3425=

DWDM SFP 1534.25 nm SFP (100 GHz ITU grid)

DWDM-SFP-3504=

DWDM SFP 1535.04 nm SFP (100 GHz ITU grid)

DWDM-SFP-3582=

DWDM SFP 1535.82 nm SFP (100 GHz ITU grid)

DWDM-SFP-3661=

DWDM SFP 1536.61 nm SFP (100 GHz ITU grid)

DWDM-SFP-3819=

DWDM SFP 1538.19 nm SFP (100 GHz ITU grid)

DWDM-SFP-3898=

DWDM SFP 1538.98 nm SFP (100 GHz ITU grid)

DWDM-SFP-3977=

DWDM SFP 1539.77 nm SFP (100 GHz ITU grid)

DWDM-SFP-4056=

DWDM SFP 1540.56 nm SFP (100 GHz ITU grid)

DWDM-SFP-4214=

DWDM SFP 1542.14 nm SFP (100 GHz ITU grid)

DWDM-SFP-4294=

DWDM SFP 1542.94 nm SFP (100 GHz ITU grid)

DWDM-SFP-4373=

DWDM SFP 1543.73 nm SFP (100 GHz ITU grid)

DWDM-SFP-4453=

DWDM SFP 1544.53 nm SFP (100 GHz ITU grid)

CAB-SFP-50CM=

Cisco Catalyst 3560 SFP Interconnect Cable (50 cm)

CAB-SM-LCSC-1M

1m-fiber single-mode LC-to-SC connectors

CAB-SM-LCSC-5M

5m-fiber single-mode LC-to-SC connectors


Varer som er tilgjengelig på lager, sendes normalt innen 5 dager. Bildet kan avvike fra produktet. Vi tar forbehold mot trykkfeil og endringer av priser og spesifikasjoner uten varsel