Kontakt oss   |   Support   |   Salgsvilkår   |   FAQ - ofte stilte spørsmål   |   Hvordan handle   |   Sikkerhet   |   Om oss   |   Ledig stilling





Test av norske nettbutikker


Du er her // Forsiden // //


Varenr: SMT3000RMI2U/Q2K3
Lagerstatus: Må bestilles, antatt 25.10.2016
Frakt: 79,- Sjekk din fraktpris
Fyll inn postnummer og klikk
knappen for å vise fraktpriser
  Vis priser
18 879,-  inkl. mva
Fra 571,-/mnd (57 mnd)
Utsett betalingen i 4-6 mnd
Velg finansiering i kassen

StruxureWare Central compatible:

Enables centralized management via StruxureWare Central.

Predicitive failure notification:

Provides early-warning fault analysis ensuring proactive component replacement.

Wide input voltage range:

Designed for harsh electrical environments to save battery life.

LED Indicators:

Provide easy-to-read status of the unit and utility power conditions.

Boost and Trim Automatic Voltage Regulation (AVR):

Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.

Serial connectivity:

Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.

High online efficiency:

Reduces utlility costs, generates less heat.

Green mode:

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Energy meter:

Provides actual kilowatt hours of usage for energy conscious users.

Predictive replace battery date:

Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Intuitive LCD interface:

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Single switched outlet group:

Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

Pure sine wave output on battery:

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Disconnected battery notification:

Warns when a battery is not available to provide backup power.

Sequenced network shutdown and reboot:

Customize network shutdown and reboot sequence of connected servers and UPSs.

Outlet group control:

Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).

Adjustable voltage sensitivity:

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points:

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms:

Provides notification of changing utility power and UPS power conditions

Automatic restart of loads after UPS shutdown:

Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test:

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Cold-start capable:

Provides temporary battery power when the utility power is out.

Hot-swappable batteries:

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Network manageable:

Provides remote power management of the UPS over the network.

Battery failure notification:

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Safety-agency approved:

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Serial connectivity:

Provides management of the UPS via a serial port.

Temperature-compensated battery charging:

Prolongs battery life by regulating the charge voltage according to battery temperature.

USB connectivity:

Provides management of the UPS via a USB port (not available on all models).

User-replaceable batteries:

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Boost and Trim Automatic Voltage Regulation (AVR):

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Intelligent battery management:

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Frequency and voltage regulation:

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Varer som er tilgjengelig på lager, sendes normalt innen 5 dager. Bildet kan avvike fra produktet. Vi tar forbehold mot trykkfeil og endringer av priser og spesifikasjoner uten varsel